LAZER CUT MACHINE
v-cut pcb separator machine 330
●Touch screen with password protection counting function also the loss of the tool
●Full pneumatic control, no noise, solenoid valve control, fast speed
●Small travel, not easy to damage the product, and safe operation
●Trimming work for a variety of thicknesses PCB / aluminum substrate
●Minimize the internal stress generated when cutting the board to avoid cracking
●The distance the among upper and lower knives can be adjusted accurately, avoiding different depths of V-groove
●can cut the highest part of the V groove edge 70mm
●Allow V-slot to be close to 0.5mm
●Full pneumatic control, no noise, solenoid valve control, fast speed
●Small travel, not easy to damage the product, and safe operation
●Trimming work for a variety of thicknesses PCB / aluminum substrate
●Minimize the internal stress generated when cutting the board to avoid cracking
●The distance the among upper and lower knives can be adjusted accurately, avoiding different depths of V-groove
●can cut the highest part of the V groove edge 70mm
●Allow V-slot to be close to 0.5mm
PRODUCT DETAIL
| Model | V-CUT-330 |
| Max cutting length | 330mm |
| Air Pressure | 0.4~0.6MPa |
| Power Supply | 220V/110V |
| Weight | 160Kg |
V cut pcb Separates boards up to 3.5mm thick;
Shears boards safely with parts as close as 0.5mm to the score line, including ceramic capacitors;
Operator proof Panels cannot be inserted into the knives except on the score line;
Pneumatically driven;
Handles high components up to 70mm;
Bow waves that can occur with round knives are avoided;
Easy adjusting of distance between knives;
Large LCD with capacity counter function.
